Rutinná kontrola alarmu horľavých plynov
Thealarm horľavých plynov is an explosion-proof and explosion-proof equipment, and should not be used beyond the specified scope. Thealarm horľavých plynov shall not be used in sulfur-containing occasions. Thealarm horľavých plynov should be used when the combustible gas concentration is lower than the lower explosive limit. Otherwise, the components may be burnt out.
Prealarm horľavých plynovs with test buttons, press the test button at least once a week to check whether the alarm system is normal and whether there is anything wrong. Thezero point and range of the alarm should be checked and calibrated every 3 months.
Je potrebné použiťalarm horľavých plynovsprimerane, vždy skontrolujte komponenty a umožnite im, aby rozšírili svoje použitie za podmienok primeraného použitia a správnej údržby.
Always check the detector for accidental water ingress. Thebreathable cover of the detector should be removed and cleaned to prevent clogging during instrument testing.
Prealarm horľavých plynovs with test buttons, press the test button at least once a week to check whether the alarm system is normal and whether there is anything wrong. Thezero point and range of the alarm should be checked and calibrated every 3 months.
Je potrebné použiťalarm horľavých plynovsprimerane, vždy skontrolujte komponenty a umožnite im, aby rozšírili svoje použitie za podmienok primeraného použitia a správnej údržby.
Always check the detector for accidental water ingress. Thebreathable cover of the detector should be removed and cleaned to prevent clogging during instrument testing.
